Heavy Duty Material Decoiler

Product Description

This heavy-duty material decoiler. Which is welded with high-quality structural steel plate. It adopts long-distance bearing fulcrum, which can bear large weight. It adopts variable diameter material supporting device, which is convenient for loading. It is decelerated by turbine and worm and runs stably. It can achieve stable and convenient material supply by using induction parking and time control parking time.

Please read this operation manual carefully before using this machine. Correct use of this machine will make this machine give full play to its maximum function.

2-1 it is applicable to the receiving and feeding of various coils, including sheet metal and non-metallic materials.

2-2 motor power can be added to cooperate with the feeding device.

2-3 the tightness of the brake device of the unpowered material rack can be adjusted, and the reinforced main shaft is used to make the material reel rotate smoothly and increase its load.

2-4 it is indispensable to cooperate with the full-automatic production of the punch, which saves manpower and material resources, reduces costs and has a particularly good effect.

2-5 imported parts are used, with less faults and long service life.

Heavy duty material decoiler Specification parameters

Heavy duty material decoiler Operation method:

5-1 first confirm whether the power supply voltage on the electric box is consistent with the power supply voltage in your factory.

5-2 then connect the power line. Please check the rotation direction of the material decoiler.

5-3 adjust the distance between the material rack and the punch press and feeding rack. The standard is about 2-3m. Adjust the distance to the required distance according to the thickness of the material. If there is a leveling machine in front of the material rack, adjust the distance according to the actual situation (about 4-5m).

5-4 adjust the handle of the material rack counterclockwise to make the diameter of the material support plate of the material rack less than the inner diameter of the coiled material, so as to facilitate the loading of coiled material.

5-5 after aligning, installing two A-type irons and locking them, put the coil rack on the rack;

5-6 adjust the handle clockwise to open the material support plate, tighten the inner diameter of the material, and then remove the handle.

5-7 install the other two A-type irons on the other two supporting plates and lock them. There should be some gap between the A-type iron and the material (about 3-5 openings). For example, if the A-type iron is too close to the material, it will affect the discharging speed and the feeding is not smooth. If it is too far away, the material will swing left and right, which will affect the coil discharging and feeding effect. Therefore, it should not be too tight or too loose, and the smooth discharging shall prevail.

5-8 time control is the parking time control, which can control the discharge speed, adjust the height of the sensing rod and appropriately control the discharge length according to the needs of the product.

Hot Tags: heavy duty material decoiler, China, manufacturers, factory, Hydraulic Uncoiler Machine, Automatic Double Head Uncoiler, Heavy Duty Decoiler, Double Head Decoiler, Automatic Pallet Decoiler, Decoiler with Loading Coil Car

(The price of the website platform is not the actual quotation, please contact us for the specific quotation according to your products and suitable machine models)